Documentation - Drawings

record C 127 X - sample and general approval drawings

record C 127 X - sample and general approval drawings

Product Bulletin announcing the 5100 Series Flush Panic Exit Device.

record-usa manufactures two standard electric lock options for the Series 5100 Sliding Doors.
Both units mechanically inhibit the slide operation of the door without negating the emergency swing
"breakout" function required by most safety-to-life standards. Each is concealed within the 4-1/2" wide by 7" tall aluminum header along with the door operator.

The Fail Secure Electric Lock remains locked during a power failure, maintaining security when required. The Fail Safe lock will unlock during a power outage providing easy manual operation of the sliding door. Both units are based on the same electro-mechanical design using a continuous duty electric solenoid and extended life conical spring. A unique feature of the record-usa electric lock is that it can be easily field modified from one configuration to the other.

Both versions include a monitor switch to provide lock status to the Series 5100 microprocessor-based door control. When the control receives a request to open signal, it will immediately unlock the electric lock and when the monitor switch indicates an unlocked condition the door will begin to open. Should the control not receive a signal from the monitor switch, after a short delay, advanced software will attempt to slowly open the door and, if door motion is detected, within a few inches the door will resume a normal opening cycle.

Drawing; Header Assemblies, Single and Bipart showing Electric Lock locations.

Electric Locking

CAD drawings (DWG) - record Speedgate Swing Advanced, Länge 1925mm

5900 Bottom Guides for SX-O & SX-P Units Also REVERSE BREAKOUT, 5900 Series Manual ICU, 59-2.42

Series 5100 Fixed Sidelite Standard Weatherstripping, Placement of weatherstripping

Lock Indicator (Right Side UP) 9-25-0021   CL or DB

Series 5100 Recess Panic Device Specification Details.

4500 Series Slide Fold, Muntin Bar and Bottom Rail Options, 45-2.05

4500 Series Slide Fold, Glazing Variation Options/Details, 45-2.06

4500 Series Slide Fold, Transom Glazing Options, 45-2.07

4500 Series Slide Fold, Control Panel Options, 45-2.08

Series 5100 Sliding Door Unit, Bipart with Extra Centered O Panel under header. (UHEPA)

Transom flush glazing & thermal glazing options

5400 Series LMI Automatic Sliding Door- Bipart Inside Slide (Full Breakout) - 06 Bipart Simultaneous Slide - Swing Out Sidelites - Hurricane - Stormcord - LMI (Large Missile Impact) rated sliding door 

Document notifying 35mm Arm Adaptor becoming the standard for the Standard Push Arm.

Page from Installation Manual showing application of hard stop kit to 6100/8100 Drive Module w/Control (operator).

Brochure indicating the brake option available on the 8000/8100 Drive Module w/Control (operator).

5100 Series Configurations Sheet.

Document showing various operator cover preps, both single and dual.

A drawing document illustrating single and dual applications, both 6100/8100 and 8600/8700

A Drawing showing details automating an Ellison balanced door with the 8100 operator.

A Drawing document showing placement of the Transfer Pivot Assy. to a Telescope Trackless Bottom Guide Manual Sliding Door Unit.

Series 8700 Overhead Concealed Swing Operator with Isolated Pivot (Butt, Offset, Continous)